NEWS LIST
- Systémy BRALEP
- Pracovní návody
- Koupelna - Hydroizolace, lepení a spárování
- Exteriér - lepení, nivelování, spádování
- Dřevěná podlaha systémem bralep
- Rychlý systém - Renovace chodby v panelových domech
- Úprava a tmelení sádrokartonů systémem bralep
- Balkon a terasa - Hydroizolace, lepení a spárování dlažby
- Podlaha - nivelace, lepení a spárování dlažby
- Použití výrobků BRALEP dle podkladu
- Certifikáty
- Nabídka volných pracovních pozic
- Reference
- Archiv akcí
- Projekty
HI 180 (Z15810000)
A single-component hydraulically curing powder compound.
BRALEP HI 180, a single-component hydraulically curing powder compound is designed for waterproof insulation of bathrooms, shower enclosures, balconies, terraces, non-insulated houses and floors. Suitable for both interior and exterior. Not intended for permanent traffic and normal walking (laying of the final layer, paving, etc. is necessary if there is a risk of mechanical damage to the HI 180 layer).
Crystals preventing from ground moisture penetration are formed by the reaction of the components with the substrate, so it is also suitable for the insulation of damp basement premises. To be applied in two cross layers at a maximum height of 3 mm (use a reinforcing mesh for thicker layers). Waterproof in both directions. Certified against pressurized water up to 0.5 MPa (approx. 5 bar), which corresponds to a 50 metre water column. If the technological process is followed, suitable for insulation of the pools under the final paving, coating, etc.
Colour: grey
Consumption: 1.3 kg/m2/mm
Set to light foot traffic: 12 hours
Laying: 5 days
Water consumption: 6.5 - 7.5 l / 25 kg
Packaging: 3, 7 and 25 kg
Code:
Z15810000
Crystals preventing from ground moisture penetration are formed by the reaction of the components with the substrate, so it is also suitable for the insulation of damp basement premises. To be applied in two cross layers at a maximum height of 3 mm (use a reinforcing mesh for thicker layers). Waterproof in both directions. Certified against pressurized water up to 0.5 MPa (approx. 5 bar), which corresponds to a 50 metre water column. If the technological process is followed, suitable for insulation of the pools under the final paving, coating, etc.
Colour: grey
Consumption: 1.3 kg/m2/mm
Set to light foot traffic: 12 hours
Laying: 5 days
Water consumption: 6.5 - 7.5 l / 25 kg
Packaging: 3, 7 and 25 kg
Code:
Z15810000
ID:
Z15810000
|
301 kB | ( https://bralep.cz/www/prilohy/bezpečnostní listy_výrobky/hi180_bl.pdf ) |
|
|
65 kB | Technický list |